TA Triumph-Adler FAX 925 - Manual (Page 37)

English
Chapter 2 - Installation 29
another fax machine and no one is there to answer, your fax machine will
automatically send a cover letter with a call back message. The call back
message is printed on a separate sheet with the message “Please call back”
and a telephone number where you can be reached. The call back number
entered here is the number that appears on the call back message.
Setting fax machine identification
1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3. On the numeric keypad, press 4. The display shows 4:SYSTEM
DATA PRG.
4. Press the W YES key. The display shows NO=,
ID=.
5. After the display clears, enter the full telephone number of your fax
machine using the numeric keypad up to twenty characters.
Note: Use the Location Prog or 8/+ One Touch key to enter a “+”
character before the number, which is a generally recognised
method of indicating the international access code before the
country dialling code. The 9/Space One Touch key is used to
enter spaces in a number.
6. Press the Start key to save your entry.
7. Enter your Sender ID. This is a descriptive title up to 32 characters
long. Refer to the instructions below.
To do this Use
Enter numbers Numeric keypad. Press once for each number required.
Enter spaces Space One Touch key
Enter hyphens Hyphen One Touch key
Enter alphabetic
characters Locate the character you want on the numeric keypad. Press that key
repeatedly until the character appears.
Enter a unique
character
Press the 0/Unique key repeatedly until the character you want appears.
The following characters are available: ! # & ’ ( ) * + , - . / : ; = ? · д Я с ц
ь Ж Е Ш ж е ш
Move the cursor to
make corrections
Press
W
YES or
X
NO keys.