TA Triumph-Adler FAX 925 - Manual (Page 89)

English
Chapter 6 - Programming 81
Forward number programming
1. Press the Select Function key.
2. Press the 9/User Program One-Touch key. The display will show
1:FUNC. PROGRAMMING.
3. On the numeric keypad, press 6. The display shows 6:FORWARD
NO. PRG.
4. Press the WYES key and the display shows NO= (FORWARDING
NO.).
5. Enter the number using the numeric keypad and press the Start key.
6. Press the Select Function key to finish.
Note To select forwarding of incoming non-confidential fax messages,
press the Auto Rec. key until the Forwarding mode, FWD,
appears in the display.
Memory password
When your fax machine has been set to Memory Reception Mode, you
can protect the printing of stored messages by using a password.
Creating a memory password
1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3. Using the numeric keypad, press number 7. The display shows
7:MEM. PASSWORD PRG.
4. Press the W YES key and the display shows PRG PASSWORD.
[
] ENTER 4DIGITS.
5. Using the numeric keypad, enter a four digit password and the
display changes to PRG. PASSWORD [xxxx] YES (W) NO (X).
Note: [xxxx] indicates the four digit password you have entered.
6. Press the W YES key and the display changes to 7:MEM.
PASSWORD PRG.
7. Press the Select Function key to finish.