TA Triumph-Adler LP 4140 - Manual (Page 36)

Using the Operation Panel
2-8 ADVANCED OPERATION GUIDE
Keys
The operation panel keys are used to configure the printer. Note that
certain keys have a secondary function.
NOTE: Settings made with these keys affect only the interface currently
in use.
GO Key
This key switches the printer between on-line and off-line. Use this key to:
• Toggle the printer’s on-line and off-line states. You can temporarily
stop the print job by switching the printer off-line.
• Print and feed out one page when the printer displays Waiting.
• Recover from certain errors.
• Recover from Auto Sleep.
CANCEL Key
This key is used to:
• Cancel a printing job.
• Stop the alarm sound.
• Reset numeric values or cancel a setting procedure while using menu
system.
1 While the printer displays Processing, press [CANCEL].
Print Cancel? appears on the message display followed by the
interface in use. The interface is indicated by one of the following message:
Parallel
USB
Network
Serial (option serial interface)
Option (option network interface)
2 Select the interface to cancel using
U or V and then press [OK].
Cancelling data appears on the message display and printing stops
after the current page is printed.
Menu Key
This key lets you enter the menu system to change the setup and printing
environment of the printer.
Pressing this key during a menu selection will terminate the selection and
return the printer to the normal operation.