Rose Electronics QuadraVista QF - Manual (Page 28)

22 QuadraVista Installation and Operations Manual
 = Authorization to this OSD function is permitted
Security level 0 is the factory default setting. All settings are allowed and all functions enabled
Additional security features are listed below for each security level. These features are in addition to the
OSD security levels listed above.
If the pre-assigned password is lost or forgotten, please contact Rose Electronics Tech Support for
assistance. Please provide the QuadraVista serial number when requesting help.
Security level 8 (most limited level) allows you to work only on pre-selected channel (computer) in a
predefined display mode (Quad / Full / PiP). Except the security menu, where you can change the security
level there are no other operations available.
Quad Mode  
OSD Position    
OSD Language   
Security        
Test Pattern     
Disable Channel 
Control       
Mode PiP    
Start    
Configuration Backup
Recall    
Factory Reset
Console Video Output       
Keyboard  
Multi-Monitor 
EDID       
Video Video Input       
Brightness   
Contrast   
Horiz. Position   
Vert. Position   
Screen Width   
Phase   
Format    
Computer Keyboard       
Mouse       
Reset PS/2 
Change EDID/DDC       
Help Command       
About       
Contact       