Rose Electronics QuadraVista QF - Manual (Page 16)

MODELS
10 QuadraVista Installation and Operations Manual
Figure 10. Computer Video, Keyboard, Mouse, and USB Connections
Powering up the System
Ensure that all installation work is complete before applying power to QuadraVista QF. Switch on
QuadraVista-QF using the power switch on the rear panel. All front panel LEDs light up briefly indicating
that QuadraVista-QF is ready for operation. QuadraVista-QF is now in Quad-Mode (default).
Power-up all the connected computers. QuadraVista-QF recognizes all input video sources automatically
and displays them on your monitor screen.
To select another display mode, use the relevant keyboard commands or buttons on the front panel.
Connecting Audio
The QuadraVista-QF can be connected to external powered speakers or audio devices for audio playback
from any of the connected computers or video/audio sources.
Three different output connection options are available (see Figure 11):
1) 3.5mm analog stereo jack
2) Digital cinch connector
3) TOSLINK optical audio jack
After the speakers have been physically connected to the QuadraVista-QF
- Open the OSD and navigate to COMPUTER > AUDIO
- Enable audio output
- Select the audio source and adjust the volume.
Keyboard
Mouse
Keyboard
& Mouse
Digital or
Analog
PS/2 Y-cable
OR
USB cable (A-B)
DVI or HD15 to DVI-I cable
Connect
USB
Devices