Rose Electronics QuadraVista QF User Manual

Page 11

QuadraVista QF Installation and Operations Manual

Figure 3. Buttons

- Buttons

1 to 4:

These buttons activate the corresponding CPU channel (computer port).

Full button:

Press to switch to Fullscreen mode.

Quad button:

Press to switch to Quad mode.

PiP button:

Press to switch to picture in picture mode (PiP).

Win button:

Press to switch to Win mode.

Selector icon

Figure 4. Hot Key Channel Selection Window

You can also switch the active channel using the hotkey and arrow keys. The selection window closes

once the channel selection timeout period has elapsed. The timeout value for channel selection can be

changed in the OSD System menu by selecting Quad mode. Then use the “Time out of Channel

Selection” menu item to indicate how long the selector icon should be displayed on the screen.

Additional Button Functions

Setting output resolution to safe output modes

To set the output resolution to 640 x 480 @ 60 Hz, press and hold buttons 1 and 2 simultaneously for 2

seconds.