Remote Processing CX-10 - Manual (Page 39)

Appendix A CX-10 Modbus Map
Appendix A Modbus Map Page 6
Watchdog Timer
These are all integer (16 bit) types. Function code 3 reads, 16 writes.
Register Read/Write Permission Detail
30 Read or write Watchdog timeout value.
0 = disable watchdog
1-255 = Timeout seconds.
31 Read or write Watchdog timer value. This register increments every second until it
matches the value in Register 30 or until a 0 is written to this register.
Non-Volatile Intgeger storage
These are integer (16 bit) types. Function code 3 reads, 16 writes. Address range is 4001 to 4256, inclusive. These registers
retain data when power is removed from the board. These registers may be set to 0 by writing a 0 to register 4802 and
resetting the board. Note that writing a 0 to 4802 also clears floating point non-volatile registers.
Volatile Integer storage
These are integer (16 bit) types. Function code 3 reads, 16 writes. Address range is 4501 to 4628. These registers reset to 0
on power up or CPU reset (manual or watchdog timeout).