Remote Processing CX-10 - Manual (Page 27)

RELAY AND OPTO INPUT LINES SECTION 6
Page 6-2
Relay 3 Relay 4
G
Relay 2
H K
P1
M
Common Relay 1
L
Figure 6-3 Relays group 3 designations
Figure 6-4 Opto Buffered inputs and Relay Groups
The third group has 4 relays and one common as shown
below.
Terminal designated as M is common for relays 1-4.
Note that designators ‘I’ and ‘J’ are not used.
Relay group locations are shown in Figure 6-4 below.
LED Status
The status of a relay is visually determined by the LED
immediately behind it. When illuminated, that relay is
energized.