RISCO Group axesplus® MAP Editor User Manual

Page 36

User Manual for MAP Editor

Uncontrolled when printed

15. To add a relay, select Relay from the access control devices and drag it to the map at a desired

location.

Figure 25: Relay Added to the Map

You may configure relay properties. The following table describes the relay properties.

Table 6: Relay Properties

Field

Description

(Name)

This name is generated when you select the name of the
relay from the available list from the Name field below.

Active State

Select the relay state (active/inactive) which should be
reflected in ACUS as default.

Back Colour

You can select the background colour for the relay. You
can select from the available options.

Background Image

This image will appear as a background for the relay.
You can attach a JPEG or BMP image for the relay.

Background Image Layout

You can change the layout of the image attached for the
relay. You can tile, stretch or zoom in the image. You
may also keep the image in the centre of the map.

Blink

Select True to activate blinking action for the relay.

Blink Colour

Select the Blink Colour which will appear when the
relay is blinking.

Blink Element

Not Applicable