RISCO Group NCache - Manual (Page 15)

NCache Nodes Configuration Installer Manual
Uncontrolled when printed © RISCO Group 10
Note: Run NCache Configuration Utility on the same machine where NCache Express is installed.
2. Click OK. The NCache Express Nodes will get configured on the machine.
1.3.3 Start /Stop NCache Nodes
To start or stop NCache Nodes automatically, click the Start /Stop NCache Nodes option button as shown in
Figure 8: The following dialog box appears.
Figure 14: Start/Stop Nodes
1. Click NCache Enterprise Cache or Express Cache option button if Enterprise or Express edition is
installed on your machine.
2. Click Start Cache to start the configured cache nodes. You may click Stop Cache to stop the nodes that
are already running.