Precision Digital PD6200 User Manual
Page 44

Model PD6200 Analog Input Rate/Totalizer
Instruction Manual
44
Setting the Display Parameter & Intensity (dsplay)
The main display (Big) can be programmed to display:
1. Rate
value
2. Total or grand total
3. Relay
set
points
4. Max & min values
5. Modbus
input
6. Display rate and units
The small display (Little) can be programmed to display:
1. Rate
value
2. Total or grand total
3. Relay
set
points
4. Max & min values
5. Engineering units or custom legends
6. Modbus
input
7. Off (no display)
8. Display rate and units
Display Intensity: The meter has eight display intensity levels to give the
best performance under various lighting conditions. Select intensity 8 for
outdoor applications.
This manual is related to the following products: