MEDC Weatherproof FernTel IP - Manual (Page 19)

Short manual FernTel IP / IP150 Page 19
2.2.8
Switching
You can switch between two connections using the switch function.
Torsten 72
Peter 36
Torsten 72
Thomas 70
06.01.06 14:40 0:22
Figure 15: Switching
1. Press the key twice or the key followed by the key during a call with an
active line and a line on hold. The active line is put on hold and the line on hold is
activated (see Figure 15).
2. To terminate the active line, you must press the key . The connection to the
active conversation partner is terminated.
2.2.9
Transferring a Call
You are making a call and would like to transfer it to another party.
Torsten 72
Peter 36
Torsten 72
Thomas 70
06.01.06 14:40 0:22
Figure 16: Transferring a Call
1. Press the key during a call.
The call is put on hold. You hear a dial tone. The line on hold is displayed
normally and the active line inversely.
2. Dial the call number of your choice.
The connection is established. If the called party answers, this can be treated like
a second call, as above.
3. Hang up or press the key followed by the key . The caller will be connected
with the dialled port.