MEDC Weatherproof FernTel IP - Manual (Page 18)

Page 18 Short manual FernTel IP / IP150
2.2.6
Muting
You can mute the microphone during a call to make a confidential enquiry in the
room without being heard on the phone.
Torsten 72
Thomas 77
06.01.06 14:40 0:22
Figure 13: Muting
1. Press the key during a call. The microphone symbol " " flashes (see Figure
13). The handset microphone is switched off. You can now make a room enquiry.
2. Press the Mute key again.
If you are making a call with the handset picked up, the flashing microphone
symbol disappears and the handset microphone is switched on again.
2.2.7
Making second Call
The line can be put on hold during a call. With the call on hold, you can make a
second call to someone else. The person on hold can't hear the second call. The hold
function is also needed to switch or transfer a call.
Torsten 72
Torsten 72
Please dial
06.01.06 14:40 0:22
Figure 14: Holding a Call
1. Press the key during a call. The call is put on hold. You hear a dial tone. The
line on hold is displayed normally, the active line inversely (see Figure 14).
2. Dial the call number. A further connection is established
3. To terminate the enquiry call, press the key . You return to the conversation
partner previously put on hold.