MEDC Weatherproof FernTel IP - Manual (Page 15)

Short manual FernTel IP / IP150 Page 15
2.2.3.1
Single Dialling
For single dialling take the following steps:
Torsten 72
0211654321
Please dial
06.01.06 14:40 0:00
Figure 10: Direct Dialling
1. Pick up the handset.
2. Enter the phone number. In this case the VoIP telephone dials the number while
it is being entered
3. At the end of the call, hang up or press key
2.2.3.2
Block Dialling
For block dialling do the following steps:
1. Pick up the handset and press the key .
2. Enter the call number and press the key or . In this mode the dialling will be
executed after pressing the key respectively . During entering the call
number the digits can be edited. You can move the cursor with the keys and
and delete digits left to the cursor with the key .
3. Pressing the key the dialling will be executed at once.
2.2.3.3
Dialling during active Connection
During existing connections all digits (0 – 9, *, #) which are entered are transmitted
as DTMF signals. Using this DTMF procedure it is possible to access menu-controlled
services (e. g. answering machines, voice boxes) directly via the telephone keypad.