MCZ Comfort Air SLIM User Manual
Page 23
SLIM-BASIC COMFORT AIR KIT
Chapter 3
USE AND MAINTENANCE MANUAL
page
23
Basic comfort air kit
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
Push the flap inwards at the bottom right corner of the
motor support with force to allow the same to be released
from the pin.
Lift the flap by 90° and push it in until it is released.
Now, remove the four M3 screws (two to the left and two
to the right) which hold the internal flap necessary to
secure the control unit in place
Remove the flap from the motor support and break the
pre-perforated panel (hit it with a hammer and remove it)
M3
SCREWS
FLAP
ATTACHMENT
PIN