MCZ Comfort Air SLIM - Manual (Page 12)

SLIM-BASIC COMFORT AIR KIT Chapter 3
USE AND MAINTENANCE MANUAL page
12
Basic comfort air kit Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
2.2.1.1.
FORCED VENTILATION SLIM KIT
INSTALLATION METHODS
The kit can be installed so that the air outlet is either on the left or
right.
Everything is assembled as standard so that the air ducting is on the left. To duct it on the right, do as follows:
 Lift the external flap and remove the internal flap by unscrewing the four screws “P” (two on the left and
two on the right).
 Remove the rubber sleeve “Q”.
 Remove the screw “R” situated at the front and the screw “S” situated at the rear.
 Remove the fan
 Remove the lower plate by unscrewing the 4 nuts.
DUCTING
ON THE LEFT -
STANDARD
DUCTING
ON THE RIGHT
P
Q
R
S
FAN
EXTERNAL
FLANGE
INTERNAL
FLANGE