MCZ Comfort Air SLIM - Manual (Page 20)

SLIM-BASIC COMFORT AIR KIT Chapter 3
USE AND MAINTENANCE MANUAL page
20
Basic comfort air kit Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
2.2.3.2.
Hot air outlet maintenance
CAUTION!
DISCONNECT THE 230 V POWER SUPPLY CABLE
BEFORE PERFORMING ANY MAINTENANCE WORK.
 Lamp replacement
1. remove the decorative glass by lifting the edge up and pulling it
out
2. Remove the malfunctioning lamp by forcing it sideways towards
the lamp holder
3. insert a new lamp (max. 230V 80 Watt R7s fitting) taking care
not to touch the glass with your fingers (if this happens, wipe
thoroughly with a cloth dabbed in alcohol).
4. reposition the glass by inserting the supporting hooks into the
purpose-provided slits, sliding it down
Only use halogen lamps of the above type (max. 230V
80 Watt R7s fitting).
 Cleaning the hot air outlet glass
1. Detach the glass from its seat by lifting the edge up and pulling
it out
2. Only use a damp cloth to clean it.
3. reposition the glass by inserting the supporting hooks into the
purpose-provided slits, sliding it down.
IMPORTANT!
CAUTION: RISK OF SCALDING! ONLY TOUCH THE
GLASS WHEN IT IS COLD, WITH THE CLOSED
FIREPLACE AND LAMPS TURNED OFF
 Tray
The essence dispenser tray “6” is designed to humidify the air and can
only be used if the hot air outlet is directed in a particular way (in other
words, with the ducting to the left or right). It can easily be removed
from its seat, simply by removing the glass at the front as explained in
the previous paragraph.
CAUTION!
Only insert water or room fragrancing essential oils,
avoid perfumes containing alcohol at all costs (risk of
fire).
IMPORTANT!
Remove the tray from the seat for filling only when
the hot air outlet is cold and the closed fireplace is
turned off.