Epson EPL-C8200 - Manual (Page 53)

Installing the Options 45
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
R Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura
_______
ABE J.Holmes _______
Installing an Interface Card
Follow the steps below to install an optional interface card.
c
Caution:
Before you install the interface card, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
1. Be sure to set any switches and jumpers on the card, as
necessary. See the interface card’s manual for details.
2. Remove the screws from the shield plate on the back of the
printer and remove the plate.
Note:
❏ You can install the interface card in either slot.
❏ Store the shield plate in a safe place. You will need to reattach
it if you remove the interface card later.