Epson EPL-C8200 - Manual (Page 17)

Assembling the Printer 9
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
R Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura
_______
ABE J.Holmes _______
3. Insert the plastic mounting pin on the right side of the
face-up tray into the corresponding hole inside the output
slot.
4. Insert the left mounting pin on the face-up tray into the hole
on the left side of the output slot.
5. Release the spring so that the end rests against the outer case
of the printer as shown below.