Epson EPL-C8200 - Manual (Page 44)

36 Installing the Options
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
L Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura
_______
ABE J.Holmes _______
Installing the Memory Module
You can increase printer memory up to 256 MB (including
standard printer memory of 64 MB) by installing the optional
DIMM (Dual In-line memory module). This printer has two slots
for optional DIMMs.
You can purchase DIMMs from various vendors. Be sure to meet
the following requirements:
c
Caution:
Before you install a memory module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
DRAM type Synchronous Dynamic RAM Double In-line
memory module (SDRAM DIMM)
Memory size 32 MB, 64 MB, 128 MB, or 256MB
Type 168-pin type, 64 bit, with SPD
Access speed 66.66 MHz or higher (15 ns or less)
Height Less than 40 mm