Epson EPL-C8200 - Manual (Page 46)

38 Installing the Options
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
L Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura
_______
ABE J.Holmes _______
3. Open the front side of the right side cover until the pin on the
cover comes out of the hole. Then remove the cover by sliding
it back.
4. Check the position of the slots for optional DIMMs.
c
Caution:
You should not remove any modules from the circuit board.
If you remove them, the printer will not work.