Epson EPL-C8200 - Manual (Page 24)

16 Assembling the Printer
R4C4450 Setup G.
Rev. C
A5 size SAFETY.FM
7/18/00 Pass 0
L Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura
_______
ABE J.Holmes _______
3. Take the photoconductor unit out of its package and unwrap
the protective sheet while holding the handle as shown below.
c
Caution:
❏ Be sure not to touch or scratch the surface of the drum.
❏ When replacing the photoconductor unit, avoid
exposing it to room light any longer than necessary.
4. Hold the handle on top of the photoconductor unit and place
the unit on the guide rails. Insert it all the way into the printer.