Receiving faxes manually, Receive a fax by polling, Receiving faxes manually receive a fax by polling – Epson WP-M4595DNF User Manual
Page 105
Note:
When you receive a call and the other party is a fax, the product receives the fax automatically even if the answering machine
picks up the call. If you pick up the phone, wait until the LCD screen displays a message saying that a connection has been
made before you hang up. If the other party is a caller, the phone can be used as normal or a message can be left on the
answering machine.
Receiving faxes manually
If your phone is connected to the product, and Auto Answer mode has been set to Off, you can receive fax data after the
connection is made.
Note:
❏ Depending on the Fax Output settings, the received fax is saved as data or printed.
&
“Changing Fax Output setting to print” on page 99
❏ If Fax Output is set to Save, the received fax data is automatically saved as data, and you can skip step 1.
A
Load A4-size plain paper.
&
B
When the telephone rings, lift the phone connected to the product.
C
Select Receive.
D
Press the x Start (B&W) button to receive the fax, and then put the phone back on the hook.
Note:
If Fax Output is set to Save, the received fax data is automatically saved as data, and you do not have to proceed to
step 5.
E
Press the x Start (B&W) button to print your faxes.
Receive a fax by polling
This allows you to receive a fax from the fax information service you have called.
User’s Guide
Faxing
105