Operation, Cleaning and care, Disposal – Powerfix Z15003 User Manual
Page 26
26 GB/MT
off again. Check again that all the screws,
bolts and fixings are firmly seated.
Q
Operation
j
Place the workpiece on to the base plate
32
against the rear stop
27
and secure it with the
vice
41
.
Note: Ensure that the workpiece lies against
the base plate
32
.
m CAUTION! DANGER OF INJURY! Ensure
that the length of the workpiece is at least half
the length of the stop
27
, otherwise the work
piece may become loose and slide out.
j
Set the vice
41
so that the workpiece lines up
with the centre of the cutting disc.
j
Now switch on the angle grinder and press it
down on to the workpiece.
j
Avoid any backwards movement and apply
even pressure on the workpiece.
Q
Cleaning and care
j
Use a slightly moist, flufffree cloth when you
are cleaning or polishing the product.
Q
Disposal
The packaging is made entirely of recycla
ble materials, which you may dispose of
at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your wornout
product.
79200_ES_IT_PT_content.indd 26
9/3/2012 1:02:02 PM