Powerfix Z15003 - Manual (Page 24)

24 GB/MT
Packaging materials present a suffocation hazard.
Children often underestimate danger. Always
keep the product out of reach of children. This
product is not a toy.
J Keep your working area clean and well lit.
Untidy or poorly lit working areas can lead to
accidents.
J Store the angle grinder stand in dust­free and
dry conditions.
To avoid danger to life from
electric shock!
J Ensure that the mains lead does not enter the
working area of the disc or lie within range of
flying sparks.
J Always keep the angle grinder’s mains lead in
place using the clip 37 .
J Always pull your angle grinder’s mains plug
out of the mains socket before you carry out
any cleaning or adjustment of your angle
grinder stand.
Avoiding the danger of injury
and/or damage to property!
J While working with your angle
grinder always wear protective
glasses, hearing protection and
safety gloves, and if necessary a hairnet (with
long hair) and a dust mask (depending on the
materials being cut).
J Do not wear loose clothing while you are
working with your angle grinder stand.
J Fasten the angle grinder stand through the fas­
tening holes down on to a workbench / table.
Ensure that the workbench / table and the
stand are stable.
m CAUTION! DANGER OF INJURY! Ensure
that you do not come into contact with the cut­
ting disc while working.
J Always use the cutting disc safety guard 5 .
J Use this angle grinder stand only with angle
grinders that have a suitable metal protective
guard around the disc.
J Position this protective guard on the grinder in
such a way that the lower part of the rotating
cutting disc is uncovered and the grinder’s pro­
tective guard cannot come into contact with the
workpiece.
J CAUTION! DANGER OF FIRE!
Cutting metal creates sparks. Ensure
that there are no ignitable materials
in the working area.
J Sparks can damage paint, glass and other sur­
faces. Do not wear clothing made of nylon or
polyester; wear suitable, non­inflammable
working clothes.
J Ensure that the workpiece is held firmly in
place and lies tightly against the base plate.
J Do not use the device on workpieces that are
too large, otherwise they cannot be held firmly
in middle of the vice.
J Check before and regularly during use that the
screws, bolts and other fixings are firmly seated.
J Check the stand regularly for damage. Vibra­
tions can loosen screws, bolts and other fixings
during use.
J Never use your angle grinder stand if you dis­
cover that it is damaged in any way.
J Ensure that the cutting disc of your angle grinder
is mounted at right angles to the base plate.
J Use cutting discs only and not roughing discs
in this stand.
J Check the cutting disc of your angle grinder
regularly for damage.
J Never use a disc if you discover it has any dents,
nicks or other damage. It could disintegrate.
J Do not allow parts of your body to come within
working range of the cutting disc until after it
has come to a standstill.
J When cutting follow the instructions of the man­
ufacturers of the electrical power tool and the
cutting disc.
J Use angle grinders that have a cutting disc di­
ameter of 115 or 125 mm only.
J Do not allow anyone else to come within the
working range of the device while you are us­
ing it.
79200_ES_IT_PT_content.indd 24 9/3/2012 1:01:59 PM