Ericsson R250d PRO - Manual (Page 62)

Not for commercial use
– Ericsson Inc.
Menu Descriptions 57
Press Ñ
or
Ô
until the menu pointer is beside
Access No.
Press <(6 .
Enter the calling card access number.
Press
<(6 to store the number.
Press Ô
to move to Ver. no..
Enter the verification number.
Press
<(6 to store the number.
Changing the Flow Order
If your long distance service provider requires a different
dialing, you may need to change the Flow Order.
Flow order determines when the numbers are transmit-
ted by your terminal. The default flow is:
• Access number
• Stop
• Number you are calling
• Stop
• Verification number
To change the flow order:
From the previous Step 12, press Ô
until the menu
pointer is beside Flow dom. (domestic) or Flow
int.
(international).
Press <(6 .
Press Ô
to scroll through the flow order.
To change a flow setting, press Ô
until the menu
pointer is beside the setting you want to change.
Press 1 to scroll through the options for that setting.
When you have the flow order you want, press
<(6
to store the selection.
Using a Calling Card
To place a call using a calling card:
Enter or recall the number you want to call.
Press and hold
<(6 . The calling card number is
shown in the display.
Release the key after the number has been displayed.
If you are using stops between numbers, you must
press <(6 or any number key to send the next
sequence of numbers. If you use pauses, the num-
bers are sent automatically after the specified length
of time chosen in the Flow function.
Terminal Menu
The TERMINAL Menu contains the following sub-
menus for enhancing the use of your terminal for Radio
Setup, Group Setup, and Alert Setup.
Radio Setup
Radio Setup contains the following choices for adjust-
ing the volume levels and answer options while you are
in Radio Mode.
Ditto Lornetta.book Page 57 Thursday, July 13, 2000 3:55 PM