Ericsson R250d PRO - Manual (Page 60)

Not for commercial use
– Ericsson Inc.
Menu Descriptions 55
display. Press
Ô
to display the home count. Press
Ñ
to
return to the total count display. To reset from Standby
Mode, press
Ф
74
Ф Ф
, and then press <(6 to reset.
Time Count
The Time Count function shows the approximate total
time that the terminal has been in use. Press
Ô
to dis-
play the home count. Press
Ñ
to return to the total
count display. To reset from Standby Mode, press
Ф
75
Ф Ф
, and then press <(6 to reset.
Locks Menu
The LOCKS Menu contains the following choices for
enabling protection services in the terminal to limit its
use. You can select the lock options most useful for your
desired level of terminal security. You must enter your
security code before you can open the LOCKS Menu.
Auto Lock
When selected, the terminal is automatically locked
from making calls each time you turn the terminal On.
To unlock the terminal, enter the security code.
Dialing
You can use this option to restrict outgoing calls. Selec-
tions for this function include:
• Allow all
No outgoing call restrictions.
• Restrict all
Allows dialing of emergency numbers only.
• Local + 800 # only
Only numbers with up to 7 digits and 10-11 digit
800, 888, or 877 numbers. No operator access.
• Memory only
Allows calls only to numbers stored in memory.
Numbers cannot be stored in memory while this
restriction is enabled.
• Local + 800 # + mem only
Only the combination of the two preceding options
can be dialed.
• Restrict Internat.
Only 11 digits or fewer can be dialed, and operator
access is restricted.
• Restrict 900 #
No calls allowed with the area codes 900, 0-900, or
1-900. No operator access.
• Restrict Operator
Allows all calls except for operator access (dialing 0).
Call Cards
You can Allow or Restrict the use of calls using a calling
card or calling card features.
Ditto Lornetta.book Page 55 Thursday, July 13, 2000 3:55 PM