Replacing the lamp – Epson 5600p User Manual
Page 66
60
Maintaining and Transporting the Projector
5. To install the new filter, first insert its tabs as shown, then press
on the latch until it clicks in place.
Replacing the Lamp
The projection lamp typically lasts for about 1500 hours of use. It is
time to replace the lamp when:
■
The projection image gets darker or starts to deteriorate.
■
The lamp warning light
is flashing red or orange.
■
The message
LAMP REPLACE
appears on the screen when the
projector lamp comes on (after about 1400 hours of use). To
maintain projector brightness and image quality, replace the lamp
as soon as possible.
Contact your dealer or call EPSON at (800) 873-7766 in the United
States and Canada for a replacement lamp. Request part number
ELPLP12
.
tabs
note
You can check to see how
many hours the lamp has
been used. See page 55.
5600 and 7600.book Page 60 Thursday, December 14, 2000 2:46 PM