Connecting a component (bnc) video cable – Epson 5600p User Manual

Page 24

Setting Up the Projector

Connecting a Component (BNC) Video Cable

If your video source has component (BNC) connectors, you can use
them to project a higher quality video image. However, you’ll need a
VGA-to-3BNC video cable, which is available from EPSON; see
page 8.

Before starting, make sure the projector and your DVD player or
other video device are turned off.

1. Connect the VGA end of the cable to the projector’s

Computer 2/Component Video

port.

2. Connect the red, green, and blue leads at the opposite end of the

cable to the corresponding connectors on your video source.

3. If the image doesn’t display properly, you may need to change the

BNC

option in the projector’s Setting menu (see page 54).

To include sound in your presentation, connect the RCA audio cable
as described on page 19.

BNC cable

Computer 2/

Component Video port

5600 and 7600.book Page 18 Thursday, December 14, 2000 2:46 PM

This manual is related to the following products:

7600p