Epson 5600p - Manual (Page 59)

Fine-tuning the Projector 53
Customizing Projector Features
You can use the Setting menu to disable the projector’s sleep mode,
adjust the image shape, and customize several other features.
1. Press the Menu button.
2. Use the arrow keys (control panel) or the Enter button (remote
control) to highlight Setting . You see the options and their
settings on the right side:
3. Press Enter to select the Setting menu.
4. Use the arrow buttons (control panel) or the Enter button
(remote control) to set the following options:
■ Keystone
Corrects the shape of an image that’s no longer square after
raising the projector.
■ P in P
Selects the source used by the picture-in-picture display
(standard composite video or S-Video).
■ No-Signal Msg.
Selects a screen color or image to display when the projector is
not receiving a signal. The logo setting displays an image that
you have transferred to the projector (see page 51).
■ Prompt
Turns off the identifying text that appears briefly when you
switch picture sources. (It’s best to leave this on.)
Keystone
P in P
No-Signal Msg.
Prompt
A/V Mute
BNC
Sleep Mode
Reset
Execute
:
:
:
:
:
:
: 0
OFF Black
ON OFF
Blue
Black Blue
RGB
YCbCr YPbPr
ON OFF
Logo
Logo
Composite S-Video
Video
Audio
Effect
Setting
User's Logo
Advanced
About
Reset All
:Select :Enter
5600 and 7600.book Page 53 Thursday, December 14, 2000 2:46 PM