Epson 5600p - Manual (Page 54)

48 Fine-tuning the Projector
4. Use the down arrow (control panel) or Enter button (remote
control) to select the number to which you want to assign the
current settings.
5. Press Enter . When you see the “Overwrite?” prompt, select Yes
and press Enter .
6. Press Esc to exit the menu system.
When you want to use a saved setting, press the Preset button on the
remote control. You see the setting number displayed in yellow at the
top right of the screen.
To select another number, press the Preset button again until the
setting number you want is displayed. The projector resets itself
according to the selected setting.
Adjusting the Sound
You can use the Audio menu to adjust the sound volume or
treble/bass balance.
1. Press the Menu button. You see the menu screen.
2. Press the down arrow (control panel) or press down on the Enter
button (remote control) to highlight Audio . You see the
following:
3. Press Enter to select the Audio menu.
Volume
Treble
Bass
Reset
Execute
:
:
: 0
0
0 Video
Audio
Effect
Setting
User's Logo
Advanced
About
Reset All
:Select :Enter
5600 and 7600.book Page 48 Thursday, December 14, 2000 2:46 PM