Epson 5600p - Manual (Page 25)

Setting Up the Projector 19
Connecting the Audio Cable
To include sound in your video presentation, you need to connect the
RCA audio cable that came with your projector. If you’ve connected
more than one video source, you can include sound for just one of the
sources. (You can also include sound for your computer source; see
page 14.)
1. Connect the RCA audio cable to the left and right Audio 2 jacks
on the projector (insert the white plug into the L port and the red
plug into the R port).
2. Connect the plugs at the other end of the cable to the audio
output jacks on your video source.
RCA audio cable
Audio 2 jacks
5600 and 7600.book Page 19 Thursday, December 14, 2000 2:46 PM