Epson 5600p - Manual (Page 62)

56 Fine-tuning the Projector
You see the lamp usage hours and computer display settings on
the right:
The life span of the lamp is about 1500 hours. If the number
shown is close to 1500, make sure you have a spare lamp handy.
3. When you’re finished, press Esc .
Restoring the Default Settings
The Reset All option lets you return all the projector settings to their
default values.
Select Reset All and press the Enter button on the control panel or
remote control to display the confirmation screen. Select Yes to reset
all the default settings or No to cancel.
note
If you access the About menu
when the projector display is
set to video, you see only the
lamp life and the video signal
setting.
Lamp ON Time
Video Source
Frequency
Sync Polarity
Sync Mode
Resolution
Refresh Rate
9999 H
Computer
H 999. 99 KHz
V 999. 99 Hz
H Positive
V Negative
Sync On Green
9999x9999
999. 9 Hz :
:
:
:
:
:
:
:
: Video
Audio
Effect
Setting
User's Logo
Advanced
About
Reset All
:Select :Enter
note
The lamp usage timer doesn’t
register until you’ve used the
lamp for at least 10 hours.
Execute
Video
Audio
Effect
Setting
User's Logo
Advanced
About
Reset All
:Select :Enter
5600 and 7600.book Page 56 Thursday, December 14, 2000 2:46 PM