Epson 5600p - Manual (Page 60)

54 Fine-tuning the Projector
■ A/V Mute
Selects the screen color or image to display when you press
the
A/V Mute button. The logo setting displays an image that
you have transferred to the projector (see page 51).
■ BNC
Specifies the format for input to the Computer 2/
Component Video port. If the source is a computer, select
RGB. If the source is a video device, select YCbCr or YPbPr.
■ Sleep mode
When sleep mode is on, the projector turns off the lamp if it
has not received any input signals for 30 minutes. Turn sleep
mode off if you want the lamp to remain on all the time.
5. When you’re finished, press Esc .
Setting Advanced Features
You can use the Advanced menu to configure the projector for rear
projection or ceiling mounting, and adjust several other features.
1. Press the Menu button.
2. Use the arrow keys (control panel) or the Enter button (remote
control) to highlight Advanced . You see the features and their
settings on the right side:
3. Press Enter to select the Advanced menu.
Language
Startup Screen
Color Setting
Rear Proj.
Ceiling
Reset
Select [English]
Execute
:
:
:
:
Video
Audio
Effect
Setting
User's Logo
Advanced
About
Reset All
Absolute Color Temp. RGB
ON OFF
ON OFF
ON OFF
Select
:Select :Enter
5600 and 7600.book Page 54 Thursday, December 14, 2000 2:46 PM