Epson 5600p - Manual (Page 35)

Using the Projector 29
Controlling the Projector
While giving your presentation, you may want to switch between
picture sources, adjust the volume, or temporarily turn off the picture
and sound. Follow the instructions below to access theses features
from your projector’s control panel. You can also access these features,
plus many others, using the remote control as described in Chapter 3.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can use the buttons on the control panel (or remote
control) to switch between the different sources.
On the control panel, press the Computer button to switch between
the computer sources and press the Video button to switch between
standard (composite) video, S-Video, and component video (BNC).
After you select a source, the screen goes dark for a moment before the
image appears.
Adjusting the Volume
If your presentation includes sound, you can adjust the volume from
the projector’s control panel. Hold the
Shift button down while
pressing the + or — side of the Volume button .
Turning Off the Picture and Sound
You can use the A/V Mute button on the control panel to darken your
screen and turn off the sound. This is useful if you want to
temporarily re-direct your audience’s attention without the distraction
of a bright screen.
■ To turn off the picture and sound, press the A/V Mute button.
The screen goes dark.
■ To turn the picture and sound back on, press the button again.
Video Computer
A/V mute
Resize
Shift
Power
Resize
S Shift
Keystone
Volume
note
You can also have an image,
such as a company logo,
display on the screen
whenever you press the
A/V Mute button. See
page 51 for instructions.
5600 and 7600.book Page 29 Thursday, December 14, 2000 2:46 PM