Installing macintosh software – Epson 1200 User Manual

Page 57

5. Click

Start

, select

Run

, and type

:\Setup

(where

is your diskette drive letter).

Then click

6. Follow the instructions on the screen to install the software. Your printer software

icons appear in the EPSON folder and your printer is set as the Windows default
printer.

7. After you install the printer software, repeat steps 4 through 6 to install Status

Monitor 2 from its diskettes.

8. Restart your system.

9. Now you can start to print. See “Printing with Windows” on page 13 for

instructions.

Installing Macintosh Software

1. Make sure your printer and Macintosh are turned off.

2. Turn on the Macintosh and wait until you see the icons on your desktop, then

turn on your printer.

3. Insert the EPSON printer software diskette 1.

4. If necessary, double-click the

Disk 1

icon to open the diskette window. Then

double-click the

Installer

icon.

5. Click

Continue

6. Click

Install

and follow the on-screen instructions to install your printer driver.

Then click

Restart

7. After you finish installing software, open the Chooser. If you’re connected to the

Macintosh printer port or to a PowerBook with one port, turn off AppleTalk.

8. Click the

SP 1200

icon, then click the icon for the port you’re using. Turn on

background printing, if you want to use it. Then close the Chooser.

9. Now you can start to print. See “Printing with a Macintosh” on page 16 for

instructions.