Epson 1200 User Manual

Page 26

Text mode
Original mode

Photo Paper (13 in × 32.8 ft roll)

You can use Banner Photo Paper on a roll to print photographic banners, panoramas,
and signs up to 44 inches long. Before loading the paper, cut it to the desired length
of your image plus 2 inches to account for the necessary margins.

Make sure the cut sheet is flat; if it curls, flatten
it by following the instructions included in the
paper package. Then remove the printer’s
paper support and load one sheet at a time,
printable side up.

Support the paper from underneath or by its
edges, then press and release the

E load/eject

button to feed the paper into the printer. Select

Photo Paper

as the Media Type and

Banner

as the Paper Source setting in your printer software.

An accessory Roll Paper Holder (part number C811062) is also available for use with
your printer and EPSON Photo Paper on a roll. Contact your EPSON dealer or call
EPSON Accessories at the number listed on page 47 to order the holder.

load/eject button