Epson AcuLaser C9200 Series - Manual (Page 87)

Makes fine adjustments to the horizontal printing position of the page. This is useful for fine
adjustments.
c
Caution:
Make sure that the printed image does not extend beyond the edge of the paper. Otherwise, you
may damage the printer.
T Offset B
Adjusts the vertical printing position on the back of the paper when printing on both sides. Use this
if the printout on the back is not where you expected.
L Offset B
Adjusts the horizontal printing position on the back of the paper when printing on both sides. Use
this if the printout on the back is not where you expected.
Setup Menu
Item Settings (default in bold)
Language English, Français, Deutsch, Italiano, ESPAÑOL, SVENSKA, Dansk, Nederlands, SUOMI,
Português, Norsk,
, , , ,
Time to Sleep 5, 15, 30, 60, 120, 180, 240 Min
Time Out 0, 5 to 60 to 300 in increments of 1
Paper Source Auto, MP, Cassette 1, Cassette 2 *1 , Cassette 3 *1 , Cassette 4 *1
MP Mode Normal, Last
Manual Feed Off, 1st Page, EachPage
Copies 1 to 999
Duplex *1*2 Off, On
Binding *1*2 Long Edge, Short Edge
Start Page *1*2 Front, Back
Paper Type Normal, Thick, ExtraThk, SuperThk, Transparency, Coated
Page Side Front, Back
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel 87