Epson AcuLaser C9200 Series - Manual (Page 108)

Check Paper Size
The paper size setting is different from the size of paper loaded in the printer. Check to see if the
correct size of paper is loaded in the specified paper source.
To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access
the control panel menus” on page 79 for instructions.
Check Paper Type
The paper loaded in the printer does not match the paper type setting in the printer driver. Paper
that matches only the paper size setting will be used for printing.
To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access
the control panel menus” on page 79 for instructions.
Check Transparency
You have loaded media other than Epson Color Laser Transparencies when the Paper Type setting
in the printer driver is Transparency, or transparencies are loaded when the Paper Type setting in
the printer driver is not set to Transparency. Completely blank pages are output.
To clear the error, see “Transparencies are output blank from the MP tray” on page 199.
Collate Disabled
Printing by specifying the number of copies is no longer possible due to a lack of memory (RAM).
If this error occurs, print only one copy at a time.
To clear this error, select Clear Warning from the control panel’s Reset Menu. See “How to access
the control panel menus” on page 79 for instructions.
CompactFlash Error
The installed CompactFlash memory is not supported by the printer or you selected No when the
Format Required
was displayed on the control panel. Turn off the printer and remove the
CompactFlash memory. If Format Required is displayed on the control panel, select Yes.
CompactFlash Full
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel 108