Epson AcuLaser C9200 Series - Manual (Page 156)

Removing an interface card
c
Caution:
Before you remove an interface card, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
Perform the installation procedure in reverse.
CompactFlash Memory
Installing a CompactFlash memory
An optional CompactFlash memory enables you to store overlay forms, use Reserve Job function,
and improve the collate printing environment.
w
Warning:
Be careful when working inside the printer as some components are sharp and may cause injury.
c
Caution:
Before you install a CompactFlash memory, be sure to discharge any static electricity by touching
a grounded piece of metal. Otherwise, you may damage static-sensitive components.
1. Turn the printer off and unplug the power cord and interface cable.
2. Loosen the two screws using a screwdriver. Then slide the left side cover upward and remove it.
EPSON AcuLaser C9200 Series User's Guide
Installing Options 156