Epson 660 - Manual (Page 70)

I've been using my scanner for a while with no problems, but recently
something strange occurred and my system locked up. Now every time I
try to acquire the scanner, I can't find it. Sometimes I get into EPSON Scan
Tool and the crop box and the select box will not move.
EPSON Scan Tool stores your last settings in its resource file. If your computer locks up while you are using
the scanner, it's possible for these settings to have been corrupted. Try holding down the Alt key when you
Acquire EPSON Scan Tool. This will reset the defaults in our software and you will be able to use it. If you
still cannot get into your software, simply reload EPSON Scan Tool software from the original disk.
How to set scanner as one can be used by all users in Windows2000?
During the installation of the scanner driver, the installer will modify some system files, and only "Adminis-
trator" is authorized to do so in Windows 2000.
Please follow step to authorize all user to access the scanner:
• Click "Start -> Settings ->Control Panel -> System"
• Click "User Profiles -> Copy to"
• Click "Everyone -> OK"
Where do the files go, after finishing "Scan to File", "Scan to Printer"?
After activating the "Scan to File", "Scan to Printer" operation, the files are sent to the appropriate applica-
tion, such as Microsoft Word. But if something goes wrong during transfer, you can retrieve the files in a
temporary folder: c:\windows\temp\. See File's default settings.