Silvercrest SDT 1.7 A1 - Manual (Page 181)

SilverCrest SDT 1.7 A1
English - 179
Edit
For an appointment enter the Title, Date, Time and Ringtone.

Title
Input the title via the numeric buttons [6]. Press the Asterisk button [10] to toggle between
upper case and lower case. You can select a different character set by keeping the Hash
button [7] pressed. The currently selected input method will be indicated in the upper-
right corner of the display. You can press the 0 or 1 buttons to enter special characters
and press 0 for spacebar. Press the Phonebook button [3] to save the title.

Date
Input the date via the numeric buttons [6]. Press the Phonebook button [3] to save.

Time
Input the time via the numeric buttons [6]. Press the Phonebook button [3] to save.

Ring Tone
Next assign a ringtone to the new entry. There are 18 ringtones to choose from. Press the
Phonebook button [3] to save. After the input is completed, a confirmation beep will
sound and the “Saved” message will appear for a few seconds on the display [2].
Delete
The previously marked appointment will be erased after you confirm by pressing the Phonebook
button [3]. Press the Menu button [12] to cancel.
Stop Watch
Press the Phonebook button [3] to start the stop watch. Press the Menu button [12] to stop the stop
watch.
If you have already taken a time you can press the Menu button [12] to resume the stop watch.
While the time has been stopped you can press the Phonebook button [3] to reset the stop watch.
Resetting the base
You can restore the base to its factory settings. Please note that this will erase all settings. However,
the system PIN will not be reset. To reset the base to the factory defaults, press and hold the
button of the directional control [4] for at least 10 seconds. Press the Phonebook button [3] to
confirm the safety prompt, or press the Menu button [12] to cancel. If you decide not to cancel,
enter the phone's PIN code and press the Phonebook button [13] to confirm.