Silvercrest SDT 1.7 A1 - Manual (Page 161)

SilverCrest SDT 1.7 A1
English - 159
Getting started
Switching the handset on and off
As soon as a handset is placed onto the base it powers on automatically. You can also use the End
call button [5] to power your handset on or off. To do so, press and hold the End call button [5] for
longer than five seconds.
Setting the language
You can set the language for the handset and for the answering machine independently.
Setting the handset language
Proceed as follows to set the handset language:

While the handset is in standby mode, press the Menu button [12] to show the menu.

Press the  or  buttons on the directional control [4] to select the “Mobilteil” menu.

Press the Phonebook button [3] to confirm your selection.

Press the  or  buttons on the directional control [4] to select the “Sprache” item.

Press the Phonebook button [3] to confirm your selection.

Press the  or  directional control buttons [4] to select the desired language (e.g.
"English") from the list.

Press the Phonebook button [3] to confirm your selection.

A confirmation beep will sound and the “Saved” message will appear for a few seconds
on the display [2].
Setting the answering machine language
Proceed as follows to set the answering machine language:

While the handset is in standby mode, press the Menu button [12] to show the menu.

Press the  or  buttons on the directional control [4] to select the “Ans Machine” menu.

Press the Phonebook button [3] to confirm your selection.

Press the  or  buttons on the directional control [4] to select the “Ans Settings” item.

Press the Phonebook button [3] to confirm your selection.

Press the  or  buttons on the directional control [4] to select the “Language” item.

Press the Phonebook button [3] to confirm your selection.

Press the  or  directional control buttons [4] to select the desired language (e.g.
"English") from the list.

Press the Phonebook button [3] to confirm your selection.

A confirmation beep will sound and the “Saved” message will appear for a few seconds
on the display [2].