Silvercrest SDT 1.7 A1 - Manual (Page 175)

SilverCrest SDT 1.7 A1
English - 173
Handset Name
Here you can change the name of the handset (default "Handset"). The handset name can contain
up to 11 characters.
Press the Menu button [12] to erase the existing name character by character. Enter the handset
name via the numeric keys [6]. Press the Asterisk button [10] to toggle between upper case and
lower case. You can select a different character set by keeping the Hash button [7] pressed. The
currently selected input method will be indicated in the upper-right corner of the display. You can
press the 0 or 1 buttons to enter special characters and press 0 for spacebar. Press the Phonebook
button [3] to confirm your entry. A confirmation beep will sound and the “Saved” message will
appear for a few seconds on the display [2].
The entered name will be suffixed by the number of the handset when shown on the
display [2].
Keypad Beep
Press the  or  directional control buttons [4] to enable or disable the keypad beep. The
confirmation beep is not affected by this setting. To save the selected setting, press the Phonebook
button [3]. A confirmation beep will sound and the “Saved” message will appear for a few
seconds on the display [2].
Contrast
Here you can set the display contrast in 8 levels
(1=low contrast; 8=high contrast). Press the  or  directional control buttons [4] to set the
desired contrast. To save the selected setting, press the Phonebook button [3]. A confirmation beep
will sound and the “Saved” message will appear for a few seconds on the display [2].
Auto Talk
If the handset is on the base when an incoming call arrives, the call can be accepted automatically
by removing the handset from the base. Press the  or  directional control buttons [4] to switch
this function on or off. To save the selected setting, press the Phonebook button [3]. A confirmation
beep will sound and the “Saved” message will appear for a few seconds on the display [2].
Backlight Time
This lets you choose how long the display should stay illuminated after pressing a button. The
possible values are 10S, 20S, 30S or 40S. Press the  or  directional control buttons [4] to
select the desired option. Press the Phonebook button [3] to confirm your selection. A confirmation
beep will sound and the “Saved” message will appear for a few seconds on the display [2].