Sealey VS8625 - Manual (Page 2)

Function
Button
Service
LED
EPB
LED
OK
Button
Mode
Button
3. FEATURES / OPERATION
Original Language Version
VS8625 Issue: 1 - 21/07/10
The VS8625 tool:
• is compatible with the latest CAN vehicles.
• enables service and repair functions to be carried out on EPB systems.
The new VS8625 Volvo SLR and EPB tool has been designed to allow users to
extinguish the service light following the servicing of a vehicle. It also allows for the
servicing and replacement of brake pads and components used in the new
Electronic Parking Brake systems which have been introduced to the Volvo range.
SLR Functions
Reset Service Light – This tool will extinguish the service light on the
dashboard after a service has been carried out.
Reset Service – Reset the Service Interval Messages displayed on the
Messages Driver Information Module.
EPB Open – This Tool allows the callipers to be retracted allowing
the brake pads to be removed for service. This also
provides assistance in fitting new Park Brake motors,
brake calipers and discs, as well as replacing wheel
hubs as the callipers are retracted, releasing the
braking components.
EPB Close – After servicing, the callipers can be advanced to their
original position without the current calibration being
effected.
MODE Selection for selecting Service Functions.
MODE Selection for selecting EPB Functions.
3.1. Vehicle Set-Up.
3.1.1. Ensure that the vehicle’s ignition is turned off and that the vehicle is on a level surface.
3.1.2. Connect the tool to the correct diagnostic socket on the vehicle, refer to the vehicle owner’s manual
for it’s location.
3.1.3. Turn on the vehicle’s ignition and start the engine. For button (Start/Stop) type. insert the key, press start
button for at least 2 seconds until the ignition is on (ensure the brake or clutch pedals are NOT pressed).
Function Buttons