Fig.4 fig.5 fig.6 fig.7 – Sealey TSTVRK User Manual
Page 2

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
© Jack Sealey Limited 2012
TSTVRK Issue: 1 - 23/07/12
3.2.6 Pull the tyre valve upwards until it seats in the wheel rim
(fig.7).
3.2.7 Unscrew the push/pull driver from the tyre valve and
remove the cone.
3.2.8 Inflate the tyre and check for leaks around the valve
body.
3.2 Fitting Replacement Tyre Valve (fig.4)
3.2.1 Where necessary, remove any dirt and corrosion from
the area around the valve hole in the wheel rim.
3.2.2 Screw the replacement tyre valve to the push/pull
driver (fig.4).
3.2.3 Generously lubricate the tyre valve body and the inside
of the cone with a suitable rubber lubricant.
Note: DO NOT use mineral oil or grease as this will
cause the tyre valve body to deteriorate.
3.2.4 Place the thin end of the cone into the valve hole in the
wheel rim and align the tyre valve (fig.5).
3.2.5 Use the push/pull driver to force the tyre valve all the
way through the cone until it has entered the wheel
(fig.6).
fig.4
fig.5
fig.6
fig.7