Sealey MAC01 User Manual
Page 2
General Information:
a)
When inflating a totally flat tyre still fitted on a vehicle, there should not be any weight on it. The vehicle
must, therefore, be jacked up to take the weight off the tyre.
b)
The time taken to inflate a tyre will depend upon the volume of air and pressure required.
c)
If the compressor does not work when it is plugged in, check the operation of the lighter socket, it may
require the ignition switch to be in the ‘ON’ position for it to work.
NOTE: The compressor may also be used on items such as inflatable dinghies, sports balls, air beds etc. using one of
the two adaptors supplied.
NOTE: the pressure gauge is not a calibrated instrument. It is recommended to use a calibrated tyre pressure gauge
for an accurate final reading.
CAUTION: Some items may not indicate the pressure required or the safe maximum pressure. Be very careful
not to over-inflate.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycle centre and disposed of in a manner which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
Original Language Version
01284 757500
01284 703534
www.sealey.co.uk
Web
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
sole UK Distributor, sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
MAC01 Issue: 1 - 23/10/09
01284 757500
01284 703534
www.sealey.co.uk
Web