Sealey TC962 - Manual (Page 3)

5.2.7. Lever the bar against the cone tube and rotate the bead over the rim (fig. 6).
5.2.8. If a tube is fitted, remove it.
5.2.9. Lift the tyre up and repeat the procedure for the lower bead.
5.3. Tyre fitting
5.3.1. Lubricate both tyre beads with an approved rubber lubricant.
5.3.2. Mount and lock the wheel to the stand as in 5.2.2. to 5.2.5.
5.3.3. Place the lower bead of the tyre over the wheel rim and insert the fitting head of the tyre bar between the bead and the rim with the
bead on the ledge of the fitting head.
5.3.4. Lever the bar against the cone tube and rotate the bead over the rim (fig. 7).
5.3.5. fit a tube if appropriate and then seat the upper bead in the same manner.
fig. 6 fig. 7
fig. 8
IncorrEct PosItIonInG for 18” WHEEL CORRECT POSITIONING FOR 18” WHEEL
5.4 BEAD BREAKING ON 18” WHEELS.
With an 18” wheel resting on the tyre changer foot there is insufficient clearance at ‘X’ in fig.8 to access the tyre bead. to remedy this
situation refer to fig.9. Butt the tyre up against the end of the tyre changer foot as shown at ‘B’ in fig.9. take hold of the handle on the ram
mechanism and pull it away from the main support so it is at an angle as shown at ‘A’ with the spade close to the bead. Note: Before operating
breaker place one foot on the wheel, opposite the spade, to prevent wheel ‘kick-up’. Position the bead breaker ram so that the spade is under the
rim flange. open the air valve slightly to lower the spade - do not use full pressure. check that the spade is firmly set on the tyre bead, close to
the rim and then increase the pressure until the bead breaks free. to proceed refer back to section 5.1.4.
fig. 9
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park ,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
email
Original Language Version tc961, tc962 Issue: 2 - 20/10/09