Sealey TC900 User Manual
Page 2
4.2.3. Position the bead seater so that the weight of the unit is resting
on your leg, rest the barrel flange on the rim of the wheel directly
opposite the valve stem. Attach an air line to the valve stem to
simultaneously assist in the inflation process. The bead seater
should be positioned at an angle of between 50 and 70 degrees
(Fig.4a), so that the barrel is pointing directly into the largest gap
between the tyre and the wheel (Fig.4b).
4.2.4. Holding the bead seater securely with one hand and keeping it
steady against the wheel, lift up the safety catch (Fig.3) and
quickly open the release valve with the other hand, if the bead
does not seat, recharge the tank to a higher pressure and repeat
the procedure.
NOTE: Once the bead has been set, if required, move the wheel into a
tyre cage and inflate to the manufacturers recommended
pressure.
4.3
Using the Bead Seater in the upright position (truck tyres
only).
4.3.1 Adjust the barrel, so that the barrel flange is on the bottom,
ensuring that the lock nut is secure.
4.3.2 Position the wheel against a wall or a solid prop. Make sure that
the valve stem is at the bottom and facing towards you.
4.3.3 Attach an air line to the valve stem to simultaneously assist in the
inflation process.
4.3.4 The bead seater should be positioned at an angle of between 50
and 70 degrees (Fig.5b), so that the barrel is pointing directly into
the largest gap between the tyre and the wheel (Fig.5a).
4.3.5 Holding the bead seater securely with one hand and keeping it
steady against the wheel, lift up the safety catch (Fig.3) and
quickly open the release valve with the other hand, if the bead
does not seat, recharge the tank to a higher pressure and repeat
the procedure.
NOTE: Once the bead has been set, if required, move the wheel into a
tyre cage and inflate to the manufacturers recommended
pressure.
WARNING! Always wear the personal safety equipment as stated in
section 1.1 whilst using this product.
Fig.3
Safety Catch
Fig.4a
Fig.4b
Fig.5b
Fig.5a
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
TC900 Issue: 2 - 23/11/09
01284 757500
01284 703534
www.sealey.co.uk
Web