Environmental protection, Parts list, Operation – Sealey VS392 User Manual
Page 2

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
W e b
Original Language Version
VS392 Issue: 1 - 27/09/13
Environmental Protection.
Recycle unwanted materials instead of disposing of
them as waste. All tools, accessories and packaging
should be sorted, taken to a recycle centre and
disposed of in a manner which is compatible with the
environment.
© Jack Sealey Limited
Item Description
Part No.
1 Puller Base Plate
VS392.01
2 Telescopic Puller
VS392.02
3 Puller Handle
VS392.03
4 Piston Clamp
VS392.04
5 Piston Clamp Bolt 34mm x2 VS392.05
6 Piston Clamp Bolt 59mm x2 VS392.06
7 'T' Handle Hex Key 6mm
VS392.07
3. PARTS LIST
3.1.
Position the Piston Clamp (item 4) over the piston
shaft so it rests on the shock absorber main body
(
DO NOT tighten the Piston Clamp hex bolts).
3.2.
Screw Puller Base Plate (item 1) and Puller Handle
(item 3) onto Telescopic Puller (item 2) and position
over shock absorber piston shaft so it rests on the
Piston Clamp previously fitted.
3.3.
Fit original shock absorber nut onto piston thread
(hand tight only).
3.4.
Rotate Puller (item 3) handle clockwise to extend
shock absorber piston.
3.5.
Once piston shaft is fully extended, tighten hex bolts
with the 6mm Hex Key supplied to clamp
the piston shaft in the extended position.
3.6.
Remove Puller assembly (items 1, 2, 3) and
assemble road spring and upper mounting as
per the manufacturer's instructions.
3.7.
Once strut is assembled remove the piston clamp
(item 4).
3. OPERATION
- VS7021 SX0406 SA28 SA200T DFS55 RE55 WS680 WS681 WS650 WS570 SM14 SA57 SG16 GSA53 SA56 SA92 GSA6000 SA4 SA602L SA6001 SA686 SA681 SA680 SA682 SA291 SA6005 GSA02 GSA01 SA655 SA29/S SA297 GSA6002 SA51 SA660 SA50 SA661 MK58 VS0041 VS726 VSE127H05 MK51 SA912 SA616 SA615 GSA07 GA450 GA45 AK3842 SA354 AK3845 VS7027 VS7028 VS7029 VS7030 VS709 VS703 GSA722 RE2280 PC40 VS7010 VS7110 AP1210 AP1535 VS7233